13
Manual TV channel search
In some cases it could occur that all of the TV channels were not found and saved during the
initial installation. In this case, the missing or coded TV channels must be searched for and
stored manually.
1Switch on the TV set. If required, select the programme number for
the video recorder.
2Press MENU on the remote control. 'CLK' will appear in the display.
3Using P=r or P;q , select 'MAN' in the display (manual channel
search).
4Press OK .
5Using P=r or P;q , select the desired programme number that
you want to use for the TV channel, e.g. 'P01' and confirm with OK .
6Select the desired display using P=r :
What is hidden behind the settings?
'CH': Display/Entry of channels
'S-CH': Display/Entry of special channels
7Confirm with OK .
'CH' will flash in the video recorder display.
a'CA' will flash in the display instead of 'CH'
bIt will be switched to the display/entry of special channels. If you do not
want to assign a special channel, press MENU and begin again at step
4.
8Enter the channel of the desired TV station using the number buttons
0-9 .
aI don't know the channels for my TV stations
bIn this case, press P;q to start the automatic channel search. A changing
channel number will appear in the video recorder display.
Continue the automatic search until you have found the desired TV
channel.
9To save the TV channel, press OK as often as necessary until 'OK'
appears in the display.
0To search for other TV channels, begin again at step 4.
ATo end, press MENU .
ENGLISH
Installing your video recording