Switching the modulator on / off
If you cannot clear picture or sound interference despite optimisation, you can switch off the
Warning:
this is only possible if you have connected the video recorder to the TV set with a scart cable. Without a scart cable you will not receive a picture from the video recorder on the TV set when the modulator is switched off.
1Press STOP/EJECT to eject any cassette that might be in the device.
2 | Press the STOP | button on the remote control. Then press |
| STOP/EJECT | until the set modulator frequency, e.g. 'M583' |
appears in the display.
3Press OK .
The display will read 'MOD+' (modulator on).
4 | In the display, select | . |
| How can I switch the modulator back on? |
|
|
|
| In the display, select 'MOD+' (modulator on) with P | . |
|
|
5 | Keep pressing OK , until 'OK' briefly appears in the display. | |||
34 | Suppressing interference |
|
