Samsung 7100 manual PRI Options, PRI Mode, Normal, Same Connid

CHAPTER 2. Ошибка! Стиль не определен.

[420] PRI OPTIONS

This MMC allows the technician to program a PRI trunk card.

	No	Option	Description
0		CHANNEL ANY	When this option is set to YES, the system will place calls on any free
			channel of that PRI if the channel chosen by the user is busy. If set to
			NO, they will receive a busy signal if they attempt to access a busy
			channel even if the other channel on that PRI is free.
1		PRI MODE	PRI access mode select.
		NORMAL	Point to Point NORMAL. This operates like a standard telephone line
			with one CO number per channel and ring according to MMC 406.
		DID	Point to Point Direct Inward Dial. This operates in a similar manner to an
			analogue DID circuit with multiple CO numbers pointed to a single
			channel and translated within the system(MMC714) to a single device.
2		DLSEND	PRI dial sending mode select.
		ENBLOCK	Digits will be collected and sent in a single block similar to a cellphone.
		OVERLAP	Digits will be sent as they are dialled by the user.
3		CLIP TABLE	Used to select the Calling Party Number to send to the network. If
			NONE, MMC405 CO TRUNK NUMBER is sent to the network; other-
			wise, the Calling Party Number entry in MMC 323 corresponding with
			the selected number is sent to the network.
4		NB TYPE	Used to select the type of the Calling Party Number to send to the net-
			work.
		UNKNOWN	Unknown number
		INT.NAT	International number
		NATIONAL	National number
		NETWORK	Network specific number
		SUBSCRIB	Subscriber number
		EXTEN	Local number
		ABBREV	Abbreviated number
5		NB PLAN	Used to select the type of the Calling Party Number Plan to send to the
			network.
		UNKNOWN	Unknown numbering plan
		ISDN	ISDN numbering plan(CCITT E.163-164)
		DATA	Data numbering plan(CCITT X.121)
		TELEX	Telex numbering plan(CCITT F.69)
		NATIONAL	National standard numbering plan
		PRIVATE	Private numbering plan
		EXTEN	Local numbering plan
6		SAME CONNID	When this option is set to OFF, ISDN port is searched by CONN ID and
			if set to ON, searched by data channel id.

2-122 Samsung Business Communications