Samsung 7100 manual Tech Programming Logs, Nnnn, Lan

CHAPTER 2. Ошибка! Стиль не определен.

[856] TECH PROGRAMMING LOGS

This MMC lists the date, time and entry location of the last eight times that technician- level programming was accessed. This allows a technician to determine if there was unau- thorized access to system programming and where this access occurred. The information stored in this log is displayed, for each of the eight accesses, as follows: first line shows the start date and time of access; second line shows the access type(see table) and end date and time of access.

There are four access types:

Type	Description
NNNN	The extension number of a phone that accessed programming directly(e.g., 3203)
MODEM	Programming was accessed by PCMMC via the integrated V90 modem attached to
	the IOM board of the main cabinet.
LAN	Programming was accessed by PCMMC via the LAN connection on the MCP2 card
	of main cabinet.
SIOx	Programming was accessed by PCMMC via one of the SIO connections on the IOM
	board of the main cabinet, where x is the number(2 or 3) of the SIO port that was
	used.

DEFAULT DATA

NONE

ACTION			DISPLAY
1)	Press Transfer button and enter 856.
		(1)	11/22 11:03Æ
	Display shows:	3203	:11/22 11:27
2)	Enter number 1-8 for required access display.
		(3)	11/22 12:30Æ
	(e.g., 3)	3203	:11/22 13:30
	OR
	Press Volume button to scroll.

3)Press Transfer button to save and exit.

OR

Press Speaker button to advance to next MMC.

RELATED ITEMS

MMC 800 ENABLE TECHNICIAN PROGRAM

2-348 Samsung Business Communications