Samsung 7100 Assign System Link ID, Assign Network Trunk, Assign Network COS, Ethernet Parameters

CHAPTER 2. Ошибка! Стиль не определен.

[820] ASSIGN SYSTEM LINK ID

This MMC is used to assign the system link ID for PRI and VoIP networking. Up to 100 link IDs can be entered including SELF ID. In addition, each Link ID is associated with the IP address and IP address type of the MCP card for that system.

Option	Description
LINK ID	System ID for networking feature.
SIGNAL G/W	System IP address for VoIP networking.
IP TYPE	System IP address type for VoIP networking. SELF system IP address type
	determines ‘SYSTEM IP TYPE’ in MMC 830.

CONDITIONS

‘SELF’ represents self-node, and must be set to use the networking function. Items other than ‘SELF’ are used for station numbers and can be omitted.

DEFAULT DATA

NONE

ACTION		DISPLAY
1)	Press Transfer button and enter 820.
		SELF :LINK ID
	Display shows:
2)	Enter SELF link ID via dial keypad and
		SELF :LINK ID
	press Right Soft button.	11
3)	Press Volume button to select other link ID
		SYS01:LINK ID
	and press Right Soft button to mover cursor.
4)	Enter other link ID via dial keypad and
		SYS01:LINK ID
	press Right Soft button.	22

5)Press Transfer button to save and exit.

OR

Press Speaker button to advance to next MMC.

RELATED ITEMS

MMC 821	ASSIGN NETWORK TRUNK
MMC 823	ASSIGN NETWORK COS
MMC 824	NETWORK DIAL TRANSLATION
MMC 830	ETHERNET PARAMETERS

2-284 Samsung Business Communications