Samsung 7100 manual Station Speed Dial, Program Buttons

OfficeServ 7100 Call Server Programming Guide

[105] STATION SPEED DIAL

Allows the system administrator or technician to assign phone numbers to a station’s per- sonal speed dial locations.

CONDITIONS

Each station may have up to 50 locations(or bins) assigned to it in MMC 606(Assign Speed Block). The speed dial bins are numbered 00~49. Each assigned phone number consists of a trunk or trunk group access code followed by a separator and up to 24 digits to be dial.

These dial digits may consist of 0~9, * and #. If the system recognizes a valid trunk or trunk group access number, it will automatically insert the separator.

DEFAULT DATA

NONE

PROGRAM BUTTONS

BUsed to insert a flash code ‘F’

CUsed to insert a pause code ‘P’

DUsed to insert a pulse/tone conversion code ‘C’

EUsed to mask/unmask following digits(shows as ‘[’or ‘]’)

FUsed to enter name for speed dial bin(see MMC 106)

ACTION			DISPLAY
1)	Press Transfer button and enter 105.
		[201]	SPEED DIAL
	Display shows:	00:
2)	Dial station number.(e.g., 205)
		[205]	SPEED DIAL
	OR	00:
	Press Volume button to select station and
	press Right Soft button to move cursor.
	If selected station has no speed dial bins,
		[205] SPEED DIAL
	the display will be as shown and a new station	SPDBLK NOT EXIST
	may be selected.
3)	Dial location number.(e.g., 05)
		[205]	SPEED DIAL
	OR	05:_
	Press Volume button to select location and
	press Right Soft button to move cursor.

Samsung Business Communications 2-11