Samsung 7100 manual Tone Cadence, When changing the MMC, Unit milliseconds

CHAPTER 2. Ошибка! Стиль не определен.

[506] TONE CADENCE

Provides the ability to customize the tone cadence on a system-wide basis. The system pro- vides 11 types of tone and three types of tone provided from Central Office or a PBX sys- tem can be detected.

When changing the MMC [506]

MMC [506] should not be changed from the default levels without the assistance of the local SAMSUNG distributor.

No	Item	Description
00	BUSY TONE	The called station is busy.
01	CONFM/BARGE	A feature has been successfully activated/cleared or a Barge-In with
		Tone has been performed.
02	DIAL TONE	The system is ready to interpret key presses/dialled digits.
03	DND/NO MORE	The called station is in DND or has no free CALL buttons.
04	ERROR TONE	An error has been made.
05	HOLD/CAMPON	This is the system generated hold tone.
06	MSGWAT TONE	This is the tone heard at an SLT with a message waiting.
07	RGBACK TONE	The called station is ringing.
08	RING TONE	This is the tone heard from a ROP device or Loud Bell when these de-
		vices are called.
09	TRANSFER	This is the tone heard when the transfer button is pressed or an SLT
	TONE	hook flashes.
10	DID RNGBACK	This is the tone heard by the outside party when they dial a DID number.
11	CO BUSY	This is used to detect the busy tone provided from Central Office or a PBX
		system.
12	CO RINGBACK	This is used to detect the ring back tone provided from Central Office or
		PBX system.
13	CO DIAL	This is used to detect the dial tone provided from Central Office or PBX
		system.

DEFAULT DATA

				(unit: milliseconds)
TONE	ON	OFF	ON		OFF
BUSY TONE	500	500	500		500
CONFIRM/BARGE-IN	200	200	200		5000
DIAL TONE		CONTINUOUS

2-154 Samsung Business Communications