Samsung 7100 MS LED on Time, OFF Hook Ring INT, Ohva Answer Time, Time OUT, Tone Time, Recall

CHAPTER 2. Ошибка! Стиль не определен.

			(continued)
Timer Name	Default	Range Unit	Description
MS LED ON TIME	5	1-10 SEC	This timer controls the duration a Manual Sig-
			nalling key will remain on after use.
OFF HOOK RING INT	15	1-250 SEC	This timer controls the time between ring
			bursts to a user who has a camped-on call.
OHVA ANSWER TIME	10	1-250 SEC	This timer controls the time allowed to answer
			an OHVA call before automatic rejection.
PAGE TIME OUT	20	1-250 SEC	This timer controls the duration of a page an-
			nouncement.
PAGE TONE TIME	500	100-2500	This timer controls the duration of tone burst
		MSEC	heard over the page prior to the page an-
			nouncement.
PARK RECALL TIME	45	0-250 SEC	This timer controls how long a call is parked
			before recalling to the call park originator.
AP-MMC LOCK TIME	5	1-60 MIN	This timer monitors the PCMMC activity,
			drops the link if no action is created by
			PCMMC and returns the system back to se-
			cure program status.
PERI UCD REPORT	5	3-99 SEC	This timer determines the interval between
			periodic UCD reports provided to an SIO port.
POWER DOWN TIME	2000	500-9900	This timer monitors the power to the ROM
		MSEC	pack to begin shutdown status.
RECALL	2	1-250 MIN	This is the time an attendant recall will ring
DISCONNECT			before being disconnected.
RECALL WAIT TIME	15	0-250 SEC	This is the time any recall(hold or transfer)
			continues to recall at your station before it
			recalls to the operator.
ROUTE OPTIMISE	5	0-250 SEC	When a call is made via Q-SIG signalling,
			route optimization is activated after this time.
SMDR START /DP	30	1-250 SEC	This grace period timer starts SMDR re-
			cording for rotary dialing.
SMDR START /DTMF	15	1-250 SEC	This grace period timer starts SMDR recording
			for touchtone dialling. This timer also controls
			the LCD duration timer on the phones. The du-
			ration time displayed and the SMDR time dura-
			tion will be the same.
SYS HOLD RECALL	45	0-250 SEC	This timer determines the time calls can be
			left on hold before recalling to the holding
			station. This is a system-wide timer. Setting
			the timer to 000 means that no recalling will
			take place.

2-144 Samsung Business Communications