Samsung 7100 manual Smdr Options

CHAPTER 2. Ошибка! Стиль не определен.

[725] SMDR OPTIONS

Allows the system administrator to select the information printed on the SMDR report. The following options may be selected:

No	Option	Default	Description
00	PAGE HEADER	YES	This option determines whether a page header will print
			at the top of each page. This would normally be turned
			off if SMDR is being sent to a Call Accounting machine.
01	LINE PER PAGE	66	This option selects the length of each page to determine
			when to print the SMDR header. The number of lines is
			in the range 01-99.
02	INCOMING CALL	YES	This option determines whether incoming calls will print
			on SMDR.
03	OUTGOING CALL	YES	This option determines whether outgoing calls will print
			on SMDR.
04	AUTHORIZE	NO	This option determines whether authorization codes will
	CODE		print on SMDR. If this option is set to NO, ‘****’ is
			printed on SMDR.
05	SMDR START	YES	This option determines whether valid calls will include
	TIME		the minimum call time in total call duration.
06	IN/OUT GROUP	NO	This option allows a message, IN GROUP or OUT
			GROUP, to be printed in the ‘digits dialled’ column each
			time a station enters or leaves a group.
07	DND CALL	NO	This option allows a message, IN DND or OUT DND, to
			be printed in the ‘digits dialled’ column each time a sta-
			tion enters or leaves DND.
08	WAKE-UP CALL	YES	This option determines whether stations receiving an
			alarm reminder call will print on SMDR.
09	DIRECTORY	NONE	This option allows the system administrator to enter a
	NAME		name up to 16 characters which will appear on the
			SMDR header.
10	CALLER ID DATA	NO	This option can be selected to print Caller ID data re-
			ceived from the Central Office on incoming calls.
			This option requires the use of a 132-column wide carriage
			printer or an 80-column printer set for condensed print.
11	ABANDON CALL	NO	If this option is set to YES, unanswered calls for which
			CID information was received will print on SMDR.
13	NO. OF DIAL	0	If this option is set to a numeric value, the selected last
	MASK		digits of the number dialled field will be masked as as-
			terisks(*) on the SMDR print out. Maximum masked
			digits is 18. First 4 digits will not mask.

2-236 Samsung Business Communications