Samsung 7100 manual Wlan Parameters

OfficeServ 7100 Call Server Programming Guide

[845] WLAN PARAMETERS

This MMC modifies the WLAN parameters.

The SYSTEM KEY is used internally to distinguish between systems when registering a terminal. The default value is ‘00000’, but this must be changed to another value to enable the use of WLAN terminals. In addition, the SYSTEM KEY serves as an identification ID when a WLAN terminal connects to the WBS24.

The default value of the SYSTEM ID, ‘WBS24’, must also be changed to another value in order to use multiple systems in one area. The DNS setting for WLAN is additionally de- scribed in this MMC.

Set the network configuration for WBS24 by setting the IP assignment, Netmask and Gateway. These settings should be compatible with the Intranet since the network configu- ration setting is essential for data service. In addition, the RF frequency for WBS24 should be se- lected. Currently up to 14 frequencies may be selected.

Session Initiation Protocol(SIP) variables used for the WBS24(Basic) can be defined.

WLAN PARAMETER

No	Parameter	Description	Default
05	CODEC LIST	CODEC that can be used for VoIP calls between	CODEC 1: G.729
		WBS24 and terminal. G.711u, G.711a, G.726, and	CODEC 2: NONE
		G.729 can all be assigned.	CODEC 3: NONE
			CODEC 4: NONE
06	RF CHANNEL	Set a RF CHANNEL value that can be used by	USE CH 1: 01
		WBS.	USE CH 2: 06
			USE CH 3: 11
			USE CH 4: 00
			USE CH 5: 00
			USE CH 6: 00

Samsung Business Communications 2-325