Samsung 7100 manual Change User Passcode, ALL Station Passcodes, Default passcodes

CHAPTER 2. Ошибка! Стиль не определен.

[101] CHANGE USER PASSCODE

Allows the system administrator or technician to reset any phone’s passcode to its default value of ‘1234’. This MMC cannot display station passcodes; it can only reset them to de- fault.

Phone users can set or change their individual passcodes. The passcode is used to lock or unlock the phone for toll restriction(call barring) override and to access the DISA feature.

CONDITIONS

yThe passcode of a station performing Operator Level Programming or Technician Level Programming cannot be changed while the program mode is ‘ENABLE’.

yAn Operator or Technician Level can only delete the passcode of a station and reset the passcode to the default value, ‘1234’, not permitting to know the passcode.

Default passcodes

Default passcodes cannot be used for toll restriction override or for DISA access.

DEFAULT DATA

ALL STATION PASSCODES: 1234

ACTION		DISPLAY
1)	Press Transfer button and enter 101.
		[201] PASSCODE
	Display shows:	PASSCODE:****
2)	Dial phone number.(e.g., 205)
		[205] PASSCODE
	OR	PASSCODE:****
	Use Volume button to scroll through phone numbers
	and press Right Soft button to move the cursor right.
3)	Press Hold button to reset passcode.
		[205] PASSCODE
		PASSCODE:1234

4)Press Transfer button to save and exit.

OR

Press Speaker button to save and advance to next MMC.

RELATED ITEMS

MMC 100 STATION LOCK

2-4 Samsung Business Communications