Samsung 7100 manual Toll Pass CODE/SPECIAL Code Table, Special Code Description

OfficeServ 7100 Call Server Programming Guide

[709] TOLL PASS CODE/SPECIAL CODE TABLE

This MMC provides a means to program trunk code tables as described below.

No	Special Code	Description
0	PBX CODE	This table contains up to five entries and is used to identify the
		trunk access codes needed for toll restriction when the system
		is used with either a PBX or a CENTREX-supplied dial tone. Toll
		restriction will only be applied on trunks flagged as PBX in MMC
		401 if a trunk access code entered in this table is dialled. Toll
		restriction will be applied to the digits following the trunk access
		code.
1	SPECIAL CODE	This table identifies the special feature codes used to activate
		central office custom-calling features such as CID Block and
		Call Waiting Disable. The special feature codes can be used on
		a per-call basis without affecting LCR or toll restriction pro-
		gramming. There is a maximum of 10 entries available, each of
		which may be up to four digits long.
2	TOLL OVERRIDE	This table of eight entries is used to identify the numbers that
		will bypass all dialling restrictions. This bypass includes toll re-
		striction, trunk access and forced authorization or account
		codes. Each entry in the table can be up to 14 digits long.
3	OVRD USE TRK GRP	This entry designates the trunk group that toll override calls will
		access.

DEFAULT DATA

NONE

ACTION		DISPLAY
1)	Press Transfer button and enter 709.
		PBX ACCESS CODE
	Display shows:	1:
2)	Select PBX, SPECIAL CODE, TOLL OVERRIDE
		TOLL OVERRIDE
	or OVRD USE TRK GRP.	1:
	OR
	Press Volume button to make selection and
	press Right Soft button to move cursor.
3)	Enter index number.(e.g., 3)
		TOLL OVERRIDE
	OR	3:_
	Press Volume button to make selection and
	press Right Soft button to move cursor.

Samsung Business Communications 2-205