Samsung 7100 manual Outband, TOS Field, FAX Retry, Rtp Chk Tm, Sec, EC Gain, Nlp, EC Tail LEN

CHAPTER 2. Ошибка! Стиль не определен.

			(continued)
No	Parameter	Description	Default
13	DTMF TYPE	There are two types of DTMF transmission: INBAND,	OUTBAND
		which is industry standard(H.245) type DTMF transport,
		and OUTBAND which is a Samsung proprietary
		method.
14	TOS FIELD	An 8-bit binary value that will be used by external	All bits 0
		routers, switches, etc,(that optionally support TOS-bit
		prioritization) to identify the transport-priority value of
		data packets generated by the MGI card. This value can
		be left at the default value(00000) if your network infra-
		structure does not support this method of bandwidth
		management.
15	FAX RETRY	This option selects retry count of Fax-over-IP if errors	3
		are detected. The range is 0~4(0 means no retry).
16	RTP CHK TM	This option selects the interval time for sending RTCP.	5 SEC
17	USE T38 711	If use T38 FAX, specifies 711 Codec use	Enable
18	802.1 VLAN	Set value (0000~4095)	0000
19	802.1 PRIOR	Set value (0~7)	0
20	802.1Q	Enable or disable for 802.1Q	DISABLE
		(including 802.1 VLAN and 802.1 PRIOR)
21	EC GAIN	Set EC gain value (18~38)	32
22	NLP	Set NLP value (0~2)	0
23	EC TAIL LEN	Set EC TAIL LEN (8~128)	064 MS
24	JIT PEROID	Set JITTER PERIOD (1~10)	01
25	JIT DEL TM	Set JITTER DELETE TIME (0~500)	250

DEFAULT DATA

SEE DESCRIPTION

ACTION		DISPLAY
1)	Press Transfer button and enter 835.
		MGI3:CODEC-FRAME
	Display shows the first option.	G.729A –40 MS
2)	Enter MGI type(0-2) via dial keypad.
		MGI3:CODEC-FRAME
	OR	G.729A –40 MS
	Press Volume button to make selection and
	press Right Soft button to move cursor.
3)	Enter MGI DSP parameter via dial keypad.
		MGI3:CODEC-FRAME
	OR	G.729A –40 MS

2-308 Samsung Business Communications