Samsung 7100 manual See Description Some Timers Depend on Country, When timers value is ‘0’

			OfficeServ 7100 Call Server Programming Guide
			(continued)
Timer Name	Default	Range Unit	Description
TRANSFER RECALL	20	0-250 SEC	This timer determines how long transferred
			calls ring before recalling. This is a system-
			wide timer.
TRK AUTOMOH DISC	60	1-250 SEC	When set to ON, incoming trunk calls are
			connected to MOH automatically after the
			DISA ANSWR timer(MMC 503) expires. In
			this case the caller hears MOH. If the TRK
			AUTOMOH DISC timer expires before the
			call is answered, the call is disconnected.
TSW CONN. DELAY	0	0-10 SEC	When an incoming trunk makes an outgoing
			call to another trunk, the system connects the
			voice path after this time.
UCDS AUDIO ALARM	0	0-990 SEC	When an SVMi-20 card is installed and the digital
			UCD package enabled, this counter determines
			the maximum number of seconds a call has
			been waiting at the UCD group before the UCD
			group’s SUPV key begins to flash along with an
			audio alarm. For more UCD alarm conditions,
			see MMC 500.
UCDS VISUAL ALARM	0	0-250 SEC	When an SVMi-20 card is installed and the
			digital UCD package enabled, this counter
			determines the maximum number of seconds
			a call at the UCD group before the UCD
			group’s SUPV key begins to flash as an
			alarm. For more UCD alarm conditions, see
			MMC 500.
VOIP RE-ROUTE TM	15	0-25 SEC	If an outgoing call made via a VoIP trunk
			does not receive an acknowledgement mes-
			sage from the called party within this time,
			the call is treated as failed.

When timers value is ‘0’

Some timers are disabled when their value is set to ‘0’.

DEFAULT DATA

SEE DESCRIPTION

SOME TIMERS DEPEND ON COUNTRY

Samsung Business Communications 2-145