Samsung 7100 manual Station Lock, ALL Stations Unlocked, Type Description

CHAPTER 2. Ошибка! Стиль не определен.

2.2 Programming Procedure

This section describes a procedure of each program. Refer to the programming procedure corresponding to the MMC.

[100] STATION LOCK

Allows the system administrator or technician to lock or unlock an individual station or all stations simultaneously. The three options are as follows:

No	Type	Description
0	UNLOCKED	Unlocks a locked station.
1	LOCKED OUT	The phone cannot make calls outside the system. It can however make
		and receive intercom calls and receive incoming Trunk Line calls. When
		in this mode the Hold button will flash slow RED.
2	LOCKED ALL	The phone cannot make or receive any calls. When in this mode the
		Hold button will light steady RED.

CONDITIONS

yCheck if the station lock function is disabled at ‘MMC 301 ASSIGN STATION COS’. If so, the station cannot be locked, but a locked station can be unlocked.

yA station can be locked or unlocked under any condition when the station is in Opera- tor Level Programming or Technician Level Programming.

DEFAULT DATA

ALL STATIONS UNLOCKED

2-2 Samsung Business Communications