Samsung 7100 manual Rate Calculation Table, ALL Cost Rates no Data, Currency values£ or €

CHAPTER 2. Ошибка! Стиль не определен.

[747] RATE CALCULATION TABLE

The RATE CALCULATION TABLE is used to define the billing charges for each COST RATE. These rate tables correlate with the Trunk Cost Rate and the Costing Dial Plan. There are eight call costing rates. Each rate has the following data fields.

No	Type	Description
0	1ST DUR	This is the amount of time at the beginning of each call to which a
	(FIRST INTERVAL	fixed cost is applied.
	DURATION)	The range is 0-999 seconds; e,g. 180 seconds(three minutes).
1	1ST COST	This is the cost for the first interval duration in £s sterling or Euros.
	(FIRST INTERVAL	The range is 0 to 999; e.g., 345(£3.45 or €3.45).
	COST)
2	2ND DUR	This is the duration of each billing increment after the first interval
	(SECOND INTER-	has expired.
	VAL DURATION)	The range is 0-999 seconds; e.g., 006 seconds(six seconds).
3	2ND COST	This is the cost for each billing increment, in £s sterling or Euros,
	(SECOND INTER-	after the first interval has expired.
	VAL COST )	The range is 0-999; e.g., 100(£1.00 or €1.00).
4	SURCHARGE	This is a one-time charge, in £s sterling or Euros, that is applied to
		the call over and above the time charges.
		The range is 0-999; e.g.,150(£1.50 or €1.50).

Currency values(£ or €)

Currency values(£ or €) depend on the setting for the USE EURO option in MMC 210.

DEFAULT DATA

ALL COST RATES: NO DATA

ACTION		DISPLAY
1)	Press Transfer button and enter 747.
		COST RATE (1)
	Display shows:	1ST DUR :000 SEC
2)	Dial COST RATE number 1-8.(e.g., 3)
		COST RATE (3)
	OR	1ST DUR :000 SEC
	Press Volume button to select COST RATE and
	press Right Soft button to move cursor.

2-244 Samsung Business Communications