Samsung 7100 manual IP Phone Information

CHAPTER 2. Ошибка! Стиль не определен.

[840] IP PHONE INFORMATION

This MMC provides a means to register IP phones with the OfficeServ 7100 system. Dur- ing registration, the IP and MAC addresses are also registered. The User ID and Password must match the table entry in this MMC for the IP phone to be registered. The system de- fault phone numbers are 3201~3299 and default User IDs match the default station num- bers. The system default password is 1234. IP phones must be individually programmed with a User ID and Password in order to register with the system.

No	Option	Description	Default
00	USER ID	This is the ID the IP phone must match to register	First 99 IP phones
		with the OfficeServ 7100 system.(alphanumeric)	are 3201~3299,
			others are EMPTY.
01	USER PSWD	This is the password the IP phone must have to reg-	‘1234’
		ister with the OfficeServ 7100 system.
		(alphanumeric)
02	IP ADDR	This is the IP address of the IP phone when regis-	0.0.0.0.
		tered with the system.(Read only)
03	MAC ADDR	This is MAC address of the IP phone when regis-	FFFFFFFFFFFF
		tered with the system.(Read only)
04	SIG PORT	This is the IP UDP port of the IP phone when regis-	6000
		tered with the system.(Read only) This information
		will be needed when traversing NAT routers, fire-
		walls, etc.
05	VOICE PORT	This is the IP RTP port of the IP phone when regis-	9000
		tered with the system.(Read only) This information
		will be needed when traversing NAT routers, fire-
		walls, etc.
06	IP TYPE	This is the type of IP network used: PRIVATE or	PRIVATE
		PUBLIC.
07	DSP TYPE	This selects which CODEC this phone’s DSP will use.	G.729A
		G.729A(low bandwidth) or G.711(high bandwidth).
		This data uses IP phone to IP phone connection
		only; others follow MGI CODEC type.
08	PHONE TYPE	This is the type of IP phone used, SAMSUNG or SIP	SAMSUNG
		(future). Use SAMSUNG.
09	REGIST CLR	This is used to clear the registration of a particular	NO
		IP phone. This is similar to unplugging and plugging
		in the phone and is useful for maintenance.
10	FRAME	This value determines the transmission interval time	20 ms
	COUNT	of VoIP packets generated by the IP phone. This
		data uses MMC 841 ITP DSP PARA DOWN =
		PHONE DATA only. The range is 10~40 ms.

2-318 Samsung Business Communications