Samsung 7100 manual Second LCR, Option Description Default

CHAPTER 2. Ошибка! Стиль не определен.

[763] SECOND LCR

This MMC allows the technician to input the Extended LCR information table.

Max table index is 200. This table have translation and route information for input digits.

The last table(index 200) has only ‘NEXT ROUTE’ option. This is used for the case there are no matching table for user input digits. NEXT ROUTE option can be set by LCR or trunk group as follows.

Option	Description	Default
IN DIGIT	Define user input digits after E-LCR code	-
	(Max 16 digits)
OUT DIGIT	Outgoing digits(these digits will be sent instead of input digits) (Max	-
	16 digits)
USE LCR NUM	Select which E-LCR code(E-LCR1, E-LCR2, E-LCR3, E-LCR4)	ALL
	used for this table index.
NEXT ROUTE	Select ‘LCR’ or trunk group to seizure.	LCR
	‘LCR’ means that MMC710 LCR DIGIT table will be used with out-
	going digits(OUT DIGIT).

CONDITIONS

MMC724 FEATURE CODE: E-LCR1, E-LCR2, E-LCR3, E-LCR4 addition

DEFAULT DATA

SEE DESCRIPTION

ACTION DISPLAY

1)Press Transfer button and enter 763. Display shows:

2)Dial Table number 001-200.

OR

Press Volume button to select Table number and press Right Soft button to move cursor.

(001)IN DIGIT

(001)IN DIGIT

3)Enter IN DIGIT maximum 16 digits, and press Right Soft button to move cursor.

4)Enter OUT DIGIT option number([1]).

OR

Press Volume button to select OUT DIGIT and press Right Soft button to move cursor.

(001)IN DIGIT

1234

(001)OUT DIGIT

2-264 Samsung Business Communications