Samsung 7100 manual Assign System Speed Dial, Ans/Rls

CHAPTER 2. Ошибка! Стиль не определен.

[705] ASSIGN SYSTEM SPEED DIAL

Enables the assignment of system speed dialling numbers. There are up to 450 entries available for programming.(or 950 entries if set in MMC 861 SYSTEM OPTIONS) Each speed dial number consists of a trunk or trunk group access code followed by a separator and up to 24 digits to be dialled. These dialled digits may consist of 0-9, and #. If the sys- tem recognizes a valid trunk or trunk group access number, it will automatically insert the separator.

NOTE: If 500 entries are allowed, the bin numbers are 500-945; if 950 entries are allowed, the bin numbers are 050-999.

DEFAULT DATA

NONE

PROGRAM BUTTONS

B	Used to insert a flash code ‘F’
C	Used to insert a pause code ‘P’
D	Used to insert a pulse/tone conversion code ‘C’.
E	Used to mask/unmask following digits-shows as ‘[’ or ‘]’
F	Used to enter name for speed dial bin(see MMC 706)
ANS/RLS	Used to save the speed dial number and name to the CID translation
	table(MMC 728)

ACTION		DISPLAY
1)	Press Transfer button and enter 705.
		SYS SPEED DIAL
	Display shows:	500:
2)	Dial speed index desired.(e.g., 505)
		SYS SPEED DIAL
	OR	505:
	Press Volume button to make selection and
	press Right Soft button to move cursor.
3)	Enter access code(e.g., 9) plus the phone
		SYS SPEED DIAL
	number up to 24 digits(digits will scroll under)	505:9–121223456789
	and press Right Soft button to return to step 2.
4)	Press F key to toggle to MMC 706 step 3 to enter
		SYS SPEED NAME
	name.	505:

2-200 Samsung Business Communications