Selecting Solo Voice | Roland AT15 guide

Selecting and Playing Sounds

■Selecting Solo Voice

The Solo section of the Upper keyboard is monophonic, that is, the Solo voice will only sound for the highest note played on the Upper keyboard. This allows you to play full chords and have the selected Solo voice playing the highest (solo) note.

fig.02-11

1

1. Press the Solo [Trumpet] button (indicator lights).

The name of the selected voice appears in the display for a few seconds.

fig.02-12

Play the Upper keyboard. The selected voice will sound by the highest note played.

Each time you press the [Alternate] button you will switch between the two voices which are assigned the button.

24

NOTE

If you press the Solo [To Lower] button (indicator lights p. 47), the Solo voice can now be played by the Lower keyboard, not by the Upper Keyboard.

It is possible to change how a Solo voice will sound. Normally, the Solo voice will be sounded by the highest note you play on the Upper keyboard, but you can make settings so that the last-played note will sound the Solo voice. You can also make settings so that the Solo voice will be sounded by all notes of the keyboard to which the Solo voice is assigned. For details refer to “Changing How the Solo Voice Responds (Solo Mode)” (p. 89).

Image 24

Roland AT15 owner manual Selecting Solo Voice, Press the Solo Trumpet button indicator lights

Contents

Page Important Safety Instructions 001 002a Using the Unit Safely Power Supply PlacementMaintenance Additional Precautions Before Using Floppy Disks Handling Floppy DisksHandling the Floppy Disk Drive Main Features Basic Concepts of the Atelier Series Main Features Conventions Used in This Manual Contents Contents Using the Play FunctionsUsing the Registration Buttons Adding Various Effects to a Voice Contents Settings for the Composer Adjusting the EffectsVarious Other Settings Connecting with External Devices Contents Appendices Memo Panel Descriptions Rhythm select buttons → p Setting Up the Music Stand Connecting the Power CordTuning On the Power Turning Off the Power Using Headphones Restoring All the Factory Default SettingsSome Notes on Using Headphones Adjusting the Contrast of the Screen Displaying Basic ScreensRhythm Screen Composer Screen Selecting and Playing Sounds Listening to the Demo Songs Selecting and Playing Sounds If the following screen appears Selecting Voices About the Voices and Parts Functions of the Upper/Lower/Pedal Bass Sound Select Buttons Press the Upper Organ Jazz button indicator lights Press the Pedal Organ button indicator lightsSelecting the Upper and Lower Voices Selecting Pedal Bass Voice Press the Solo Trumpet button indicator lights Selecting Solo Voice Selecting a Voice Using the Others Button Voice name appears in the display Adjust the Volume Balance Rhythm performance Drums/SFXPedal Voice Bass part of Automatic Accompaniment Transpose the Pitch in Octave Units Octave Shift Use the Value and + buttons to set the amount of shiftPress the Utility button Press the Pedal To Lower button so its indicator goes out Press the Drums/SFX button indicator lightsSustaining Notes Played on the Lower Keyboard Playing Drum Sound or Sound Effects on the Keyboard Changing the Drum/SFX Set Press the Drums/SFX button once again Using the Rhythm Performance Using the Rhythms of the Disk ButtonSelecting a Rhythm Press a Rhythm button to select a Rhythm group Starting at the Press of a Button Starting with an IntroMaking the Intro Short and Simple Using the Rhythm Performance Starting without an Intro Stopping the RhythmStopping with an Ending Making the Ending Short and Simple What is a Fill In? Adding Variety to the Rhythm and Automatic AccompanimentChanging the Tempo Select a Rhythm p Press the One Touch Program button Press the Intro/Ending or Start/Stop button to stop RhythmRhythm and Automatic Accompaniment stops Using a Rhythm from a Disk Indicator Eject button Floppy DiskInserting and Ejecting a Floppy Disk Reviewing the Styles on a Music Style Disk Loading Disk Rhythms Into Internal Memory If the following screen appears Copying a Rhythm Saved to the Rhythm Disk Button Using the Rhythm Performance If the following screen appears Deleting a Rhythm Saved to the Rhythm Disk Button Following screen will be displayed Press the Harmony Intelligence button indicator lights Adding Various Effects to a VoiceAdding Harmony to a Melody Harmony Intelligence Changing the Type of Harmony Intelligence Once again, press the Harmony Intelligence button Adding Modulation to the Sound Rotary Effect Effect obtained is equivalent to speakersBeing rapidly rotated Effect simulating the slow rotation of speakers Reverb Effect Sustain Effect Part Upper, Lower, PedalBasic screen reappear Using the Play Functions Lower keyboard Solo voice Transposing to a Different Key Transpose Buttons Press the Transpose and + buttons Adjusting the Overall Volume Using an Expression Pedal Adding Decay to the Sound Damper Pedal Using the Foot Switch Press the right Foot Switch toward the rightPress the left Foot Switch toward the left Using the Registration Buttons Storing Registrations How to Recall a Registration Recalling Voices and Other Panel SettingsRecalling a Registration Changing the Timing of Recalling Registrations Automatically Registering When You Switch Panel Settings Settings by pressing the Manual buttonAssigning a Name to a Registration Set Using the Registration Buttons Copying Only the Name of a Registration Only the name of the Registration will be recalled Press the Save button to execute the save operation If you wish to update the contents of the Registration deta Press the Reset button to cancel the procedureRewriting of the Registration will be canceled Registration will be rewritten Loading Previously Saved Registration Sets Into the AT-15 Loading a Set of RegistrationsPress the Load button to execute loading To cancel the operation, press the Utility button Loading an Individual RegistrationPress the Rec button once again Deleting a Set of Registrations from a Floppy Disk Record and Playback Your Performance Playing Back Performance Songs Stored on Floppy Disk SMF Music Files Playback of the performance data begins Press the Track Mute button once again indicator lights Track whose indicator was turned off will be muted silencedSilencing a Specific Track Track Mute Enter the recording standby mode by pressing the Rec Button Recording a PerformancePress the Play/Stop button to start recording If you wish to erase the performance song If you wish to save the performance song on a floppy disk Press the Reset button Playing Back a Performance SongTo stop playback at any point, press the Play/Stop button Rewinding and Fast Forwarding Through Songs Press the Play/Stop button when your recording is Completed Rec button and the Play/Stop button indicators will go darkRerecording Performance Data Recorded on the AT-15 You can record over recorded performance data Erasing a Performance Song Press the Registration and Save buttons simultaneously Formatting Disks Press the Rec button again to perform the Format Changing the Name of a Performance Song Rename New name is now inserted Saving Performance Songs onto Floppy Disk You can select either Original or SMF formatSave data in Atelier format Saving in SMF Format for Atelier Sound Modules If you wish to update the contents of the performance data Press the Save button to confirm the formatIf the following screen will appear When erasing is completed, the basic screen reappears Deleting Performance Songs Stored on DiskTo delete the performance song, press the Rec button again Press the Rec button to enter record-ready mode Layering a New Recording onto SMF Music FilesPress the Play/Stop button to stop recording Re-recording a Performance Saved on Floppy Disk Selected performance data will be loaded Settings for the Composer Changing the Key When Playing Back SongsChanging the Metronome Setting Adjusting the Metronome Volume Changing the Sound of the Metronome Setting the Beat Silencing a Specific Track Muting Individual Channels of Performance Data Expression Pedal Operations Re-recording the Pedalboard Performance Function During Recording Switching the Display of Lyrics On or Off Function During Playback Adjusting the Effects Sustain EffectChanging the Sustain Length Changing the Reverb Type Changing the Wall Type Changing the Depth of the Reverb Various Other Settings Using the Foot Switch to Switch Registrations Regist ShiftTurning Initial Touch On/Off Initial Touch Turning Chord Intelligence On/Off Chord Intelli Glide Using the Leading Bass Function Leading Bass Changing How the Solo Voice Responds Solo Mode Layering the Solo Voice Lower Voice Solo To Lower Mode Changing the Solo Split Point Solo Split Point Playing a Count Sound When the Intro Ends Intro Count Down Changing the Sound Count Down Count Down Sound Registration Arranger Update Arranger Settings Recall Timing Adjust the Standard Pitch Master Tune Selecting the Midi Transmit Channel Tx Midi Channel Midi in Mode Specifying Transmission of PC Numbers Send PC Switch Setting PC Numbers Connecting with External Devices Making the Connections If You’re Using Midi Connecting the AT-15 to a Midi Instrument Troubleshooting No sound is heard Troubleshooting Bass note of the Automatic Accompaniment does not sound Display Messages 100 Display Messages 101 Voice List 102 Drum Set List 103 Drum Set List 104 Rhythm List Chord List 106 Chord List 107 Settings That Are Stored After the Power Is Turned Off 108 Glossary 109 About Atelier Series Sound Generator General MidiGS format SMF with Lyrics Midi Implementation Chart 111 Main Specifications Main Specifications Connectors Power SupplyPower Consumption Dimensions Demo Song List ProfileHal Vincent Jonas Nordwall Ric Iannone Rosemary Bailey115 Index 116 Index 117 Information 118 Avis 03238612 ’05-2-4TP