Using the Registration Buttons

If the following screen appears

The following screens appear when a registration has already been saved to

the save destination.

fig.07-12

If you wish to update the contents of the Registration deta

1.Press the [Rec] button.

The Registration will be rewritten.

If you wish to save the data without erasing the Registration set already on disk

1.Press the [Reset] button to cancel the procedure.

Rewriting of the Registration will be canceled.

2.

3.

Press the Select [-] [+] buttons to select a number for which “- - -” is displayed on the upper right of the screen.

Press the [Save] button to save the Registration set.

When the data has been saved, the basic display reappears.

When the Registration set is saved to the floppy disk, the indication of “- - -” will change to “USE.”

57

Page 57
Image 57
Roland AT15 If you wish to update the contents of the Registration deta, Press the Reset button to cancel the procedure