Roland AT15 owner manual Rerecording Performance Data Recorded on the AT-15

Record and Playback Your Performance

Rerecording Performance Data Recorded on the AT-15

You can record over recorded performance data.

fig.08-08

2, 3 1

1. Press the [Rec] button to enter into the recording standby

mode.

The [Rec] button indicator will light, and the [Play/Stop] button indicator will blink.

The point at which recording begins is returned to the beginning of the song.

2. Press the [Play/Stop] button to start recording.

When you press the [Play/Stop] button, the metronome will play two measures (bars) of count-in before recording begins.

During recording, the performance data is played back, and the data for the performances on the upper manual and lower manual is recorded over again.

3. Press the [Play/Stop] button when your recording is

completed.

The [Rec] button and the [Play/Stop] button indicators will go dark.

68

NOTE

If you wish to re-record with different settings for voices, tempo, part balance, erase the recorded song (p.

69)and re-record again. If the Control track still contains data from before you re-recorded, the volume or sounds may change during playback.

You can re-record the pedal keyboard performance. For details refer to “Re- recording the Pedalboard Performance” (p. 82).

NOTE

If you wish to keep the existing Expression Pedal data, and record only the panel operations, you can make settings to prevent the operation of the Expression Pedal from being recorded (p. 82).