Various Other Settings
MIDI IN Mode
This instrument contains two sound generators: one for SMF data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control only the sound generator for SMF data playback. However by changing the MIDI IN Mode setting, you can also control the keyboard sound generator from MIDI In.
1.Press the [Utility] button.
2.Press the Menu [ 
] and [ 
] buttons to select “MIDI.”
3.Press the [Rec] button.
4.Press the Menu [ 
] and [ 
] buttons to select “MIDI IN Mode.”
5.Press the Value
Setting | Descriptions | |
|
| |
|
| |
MODE 1 | Control the instrument as a GS sound | |
generator. | ||
| ||
|
| |
| Channels 5 through 10 and Channels 12, 14, 15 | |
MODE 2 | are transmitted to the GS sound generator, | |
and all other channels are transmitted to the | ||
| ||
| keyboard sound generator. | |
|
|
Ch | MODE 1 | MODE 2 |
|
|
|
|
|
|
1 | GS | Solo |
|
|
|
2 | GS | Pedal/GS * |
|
|
|
3 | GS | Lower |
|
|
|
4 | GS | Upper |
|
|
|
GS | GS | |
|
|
|
11 | GS | Drums/SFX |
|
|
|
12 | GS | GS |
|
|
|
13 | GS | Nothing |
|
|
|
GS | GS | |
|
|
|
16 | GS | Control |
|
|
|
To return to the basic screen, press the [Utility] button.
94
*When the pedal part button is ON, data received at the MIDI In connector will control the pedal part of keyboard sound generator.
When the pedal part button is OFF, data received at the MIDI In connector will control the GS sound generator.
➔There are limitations on the types of MIDI messages that can be received by the keyboard sound generator. For details refer to the “MIDI Implementation” (sold separately).
➔This setting remains stored in memory even while power is turned off.
Specifying Transmission of PC Numbers (Send PC Switch)
Transmission of PC (Program Change) numbers can be switched ON/OFF.
1.Press the [Utility] button.
2.Press the Menu [ 
] and [ 
] buttons to select “MIDI.”
3.Press the [Rec] button.
4.Press the Menu [ 
] and [ 
] buttons to select
“Send PC Switch.”
5.Press the Value
Setting | Descriptions |
|
|
|
|
ON | PC numbers are transmitted. |
|
|
OFF | PC numbers are not transmitted. |
|
|
To return to the basic screen, press the [Utility] button.
➔This setting remains stored in memory even while power is turned off.
