Roland AT15 Transpose the Pitch in Octave Units Octave Shift, Press the Utility button

Selecting and Playing Sounds

Transpose the Pitch in Octave Units (Octave Shift)

The pitch of the sound played by the keyboard can be adjusted in one-octave steps.

You can apply an Octave shift to the following 5 Parts:

The Upper Organ Part, Upper Orchestral Part

The Lower Part

The Pedal Part

The Solo Part

1. Press the [Utility] button.

2. Press the Menu [ ] and [ ] button to select “Octave Shift.”

f

3. Press the [Rec] button.

4. Use the Menu [ ] and [ ] button to select a performance Part to which you wish to apply an Octave Shift.

Part: Pedal, Lower, U. Organ, U. Orch, Solo

fig.02-16

5. Use the Value [-] and [+] buttons to set the amount of shift.

The value can be set to a range of +/- 3 octaves.

6. Press the [Utility] button.

The basic screen reappears.

NOTE

Please note that when you apply the Octave Shift function to certain voices, their pitch could be stretched beyond their recommended note ranges, and they may not sound as expected. Care should be taken when using Octave Shift.

27