Roland AT15 owner manual Connecting with External Devices, Making the Connections

Connecting with External Devices

If you want to hook up an external instrument to the AT-15, then this chapter is for you.

Connecting Audio Equipment

Names and Functions of Jacks and Connectors

1 MIDI Out/In Connectors

You can connect external MIDI instruments to these connectors to exchange performance information.

2 Input L (mono)/R Jacks

Using this jack, you can connect other sound generating devices or audio equipment and play sounds from other devices through the AT-15’s speaker.

3 Output L (mono)/R Jacks

You can some awesome sounds if you connect speakers or other audio equipment to these jacks. You can also hook up a cassette recorder to record your performances.

Output Jack

You can connect audio equipment using audio cables (sold separately) and play the sounds from the AT-15 through the speakers on the connected equipment or record your performances on a tape recorder or other recording device. If the output of the connected device is monaural, you must use the L (Mono) jack.

Use an audio cable to connect the input jack on the audio set or amp mixer to one of the output jacks on the AT-15. Use an audio cable with a standard plug. When purchasing an audio cable, please consult the vendor where you bought the AT- 15.

Input Jack

You can connect another sound module, such as audio equipment or an electronic instrument using audio cables (sold separately) and play the sounds from the connected device through the speakers on the AT-15.

If the input of the connected device is monaural, you must use the L (Mono) jack.

1 2 3

■Making the Connections

NOTE

To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the

power on all devices before making any connections.

1.Turn down the volume all the way on all equip- ment.

2.Turn off the power to the AT-15 and other connected equipment.

3.Connect the AT-15 and other equipment with audio cables (sold separately).

4.Turn on the connected equipment.

5.Turn on the AT-15.

6.Adjust the volume.

●After use, follow the steps below to switch off the power.

1.Turn down the volume all the way on all equip- ment.

2.Turn off the AT-15.

3.Turn off the connected equipment.

96