Selecting and Playing Sounds

Selecting a Voice Using the [Others] Button

Notice that there is an [Others] button for each part of the Upper, Lower, Solo, Pedal. By using the [Others] button, you can select all the other voices, the ones that can’t be selected directly by pressing voice buttons.

1. Press the [Others] button for the Part for which you wish to

specify a voice.

The voice name appears in the display.

fig.02-10 (P.29)

The indicator of the selected [Others] button will light.

For the solo part and pedal part, press the [Alternate] button and select the voices to assign, either with the [Alternate] button ON (lit) or OFF (unlit).

2. While the voice name is shown in the display screen, use the

Value [-] [+] buttons to select the desired voice.

The indicator of the selected [Others] button will blink.

To stop mid-way through this or any procedure, press the [Display/Exit] button.

3. Once again, press the [Others] button for the part whose

sound you wish to set to confirm the voice.

The indicator of the [Others] button will change from blinking to lit.

You can jump by voice group by pressing Menu

[ ] [ ] buttons to select the voice group. The sound number of each voice is preceded by an alphabetical character A–T which indicates the sound group; e.g., “G11 Strings1.”

You can also press the key for the part containing a changed voice to confirm the voice setting.

About the voices that can be assigned to an [Others] button, please refer to “Voice List” (p. 102).

25

Page 25
Image 25
Roland AT15 owner manual Selecting a Voice Using the Others Button, Voice name appears in the display