Roland AT15 owner manual Display Messages, 101

Display Messages

fig.E.30 fig.ot-02

Meanings:

•The Rhythm data is excessively large, and cannot be loaded.

•The performance data is excessively large, and cannot be loaded.

•Since the internal memory is full, recording is not possible.

fig.E.40

Meanings:

•The AT-15 cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount of MIDI data sent to the AT-15.

fig.E.41

Meanings:

•A MIDI cable has been disconnected. Connect it properly and securely.

fig.E.51

Meanings:

•There is something wrong with the system. Repeat the procedure from the beginning.

Meanings:

•The AT-15 is warning you that its memory will soon become full to capacity, so not much more recording can be done.

fig.ot-03

Meanings:

•To carry out the procedure, you first need to erase perfor- mance data in the AT-15. This message asks you to confirm that you don’t mind doing this. To erase the data, press the [Rec] button.

When you do not want to erase it, press the [Reset] button then save the data on disk.

fig.ot-04

Meanings:

•This Registration is already being used. To overwrite the previous Registration data in this memory, press the [Rec] button. If you decide to keep the previous Registration data in this memory and save your settings in an unused memory, press the [Reset] button, press the [Select] button to select a number for which “- - -” is displayed, and then save the data.

fig.ot-05

Meanings:

•There already is performance data having the same name on the disk.

To replace the existing data with the new version, press the [Rec] button. To save it as a separate new file, press the [Reset] button first. Then, after changing the name, save it on disk.

101