COMPUTER INPUT
SELECTING INPUT SOURCE
DIRECT OPERATION
Choose Input by pressing INPUT button on Top Control.
Choose Input by pressing INPUT, INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit.
If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).
INPUT button
INPUT 1
INPUT 2
|
|
| INPUT 3 |
|
|
|
|
|
|
| |
|
|
|
|
| |
| MENU OPERATION |
|
|
|
|
1 | Press MENU button and |
|
|
| |
POINT LEFT/RIGHT buttons to select Input and press SELECT |
|
|
| ||
| button. Another dialog box INPUT SELECT Menu will appear. | INPUT Menu icon | |||
2 | Press POINT DOWN button and the |
|
|
| |
Move arrow to INPUT source that you want to select, and then |
|
|
| ||
press SELECT button.
SELECTING COMPUTER SYSTEM
WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )
1 | Press MENU button and | |
POINT LEFT/RIGHT button to move the red frame pointer to | ||
| INPUT Menu icon. | |
2 | Press POINT DOWN button to move the red arrow pointer to | |
Input 1 and then press SELECT button. Source Select Menu will | ||
| appear. | |
3 | Move the pointer to either Digital or Analog and then press | |
SELECT button. | ||
| When your computer is connected to COMPUTER | |
Digital | ||
|
| INPUT (DIGITAL) terminal, select RGB (Digital). |
|
| |
| When your computer is connected to COMPUTER INPUT | |
Analog | ||
|
| (ANALOG) terminal, select RGB (Analog). |
|
| |
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input 1 and press SELECT button.
Input 1
Source Select Menu
Move the pointer to Digital or Analog and press SELECT button.
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
When connect the computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)] from the computer to G, B, R, H/HV and V jacks.
1 | Press MENU button and |
POINT LEFT/RIGHT button to move the red frame pointer to | |
| INPUT Menu icon. |
2 | Press POINT DOWN button to move the red arrow pointer to |
Input 2 and then press SELECT button. Source Select Menu will | |
| appear. |
3 | Press POINT DOWN button and the |
Move arrow to "RGB", and then press SELECT button. |
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input 2 and press SELECT button.
Input 2
Source Select Menu
Move the pointer to RGB and press SELECT button.
22
