Before You Start Playing

Restoring All Settings Other Than the Rhythm [Disk] Button to Their Original Factory Condition

All settings other than the Rhythm [Disk] button can be returned to their factory settings. This function is called “Panel Reset.”

1.Make sure there is no floppy disk in the disk drive before carrying out the procedure.

2.Turning off the power.

3.While holding down the [Harmony Intelligence] button, press the [Power On] switch to turn the

power on.

fig.01-15

Do not turn off the power while the following screen is displayed.

fig.01-16

When panel reset is completed, the basic screen reappears.

Adjusting the Contrast of the Screen

You can adjust the contrast of the screen.

1.Turn the [LCD Contrast] knob located at the bottom of the unit to adjust the contrast of the screen.

Displaying Basic Screens

The instrument’s display provides a large variety of information. The AT-15 has two types of basic display screen: the Rhythm display, and the Composer display. You can alternate from one to the other by pressing the [Display/Exit] button.

fig.01-17

Rhythm Screen

fig.01-18

Rhythm

Tempo Chord

Composer Screen

When internal music data is selected:

fig.01-19

Song Name

Measure Number

Tempo Chord

When you have selected a performance song on a floppy disk:

fig.01-20

Song Name

Song No.

LCD

Contrast

Tempo Chord

Phones

18

Page 18
Image 18
Roland AT15 owner manual Adjusting the Contrast of the Screen, Displaying Basic Screens, Rhythm Screen, Composer Screen