Press the [Utility] button.
Press the [Registration] button (indicator lights).

Using the Registration Buttons

Loading an Individual Registration

You can load any desired individual Registration to any desired

Registration button.

1. Insert the floppy disk containing the Registration into the disk drive.

2.

3. Press the Select [-] and [+] buttons to select the Registration set that you wish to load.

4.

5. Press the Value [-] and [+] buttons to specify the Registration button number to be loaded.

fig.07-14

To cancel the operation, press the [Utility] button.

6.

7.

8.

Press the [Rec] button.

Press the Value [-] and [+] buttons to specify the storage- destination Registration.

fig.07-15

Press the [Rec] button.

The following display appears.

fig.07-16

To cancel the procedure, press the [Reset] button.

9. Press the [Rec] button once again.

59

Page 59
Image 59
Roland AT15 owner manual Loading an Individual Registration, Press the Rec button once again