
Various Other Settings
Using the Leading Bass Function (Leading Bass)
When Automatic Accompaniment is used, and the Pedal [To Lower] button is ON, the Pedal Bass voice will normally play the root note (p. 109) of the chord you play on the Lower keyboard. If the Leading Bass function is enabled, the lowest note of the chord you play on the Lower keyboard will then be used as the bass note (the bottom note of the chord).
For this reason, the bass note will be sounded differently than normal when you play an inverted chord (p. 109).
1.Press the [Utility] button.
2.Press the Menu [ ] and [
] buttons to select “Leading Bass.”
3.Press the Value
Setting | Descriptions | |
|
| |
|
| |
| The Leading Bass function is on. | |
ON | The pedal bass tone will sound the lowest | |
note of the chord you play in the lower | ||
| ||
| keyboard. | |
|
| |
OFF | The Leading Bass function is off. | |
|
|
To return to the basic screen, press the [Utility] button.
➔You can assign the Leading Bass functions to either of the foot switches located on each side of the Expression Pedal (p. 88).
*While the intro or ending are playing, playing the lower keyboard will not produce sound.
Changing How the Solo Voice Responds (Solo Mode)
When the Solo voice is assigned to the Upper keyboard, you can specify how the Solo voice will respond when more than one key is pressed.
1.Press the [Utility] button.
2.Press the Menu [ ] and [
] buttons to select
“Solo Mode.”
3.Press the Value
Setting | Descriptions | |
|
| |
|
| |
TOP NOTE | The Solo voice will sound the highest note | |
that is played for the Solo part. | ||
| ||
|
| |
LAST NOTE | The Solo voice will sound the note that | |
was most recently played for the Solo part. | ||
| ||
|
| |
POLYPHONIC | The Solo voice will sound all notes that are | |
played for the Solo part. | ||
| ||
|
|
To return to the basic screen, press the [Utility] button.
89