
Using the Registration Buttons
Loading Previously Saved Registration Sets Into the AT-15
Here’s how to recall a previously saved Registration set from the floppy disk into the memory of the
Registrations can be selected in the following two ways.
•Loading a Set of Registrations
You can load a “set” (a collection of settings for Registration buttons
•Loading an Individual Registration
You can load settings for an individual Registration button
■Loading a Set of Registrations
Registrations Sets saved to a floppy disk can be loaded back into the instrument.
1. Insert the floppy disk containing the Registration into the disk drive.
2.
3. Press the Select
To cancel the procedure, press the [Registration] button.
4. Press the [Load] button to execute loading.
When loading is complete, the basic screen reappears.
58
NOTE
Be aware that when you load Registrations from a disk, the Registrations that were previously in internal memory will be lost. It is a good idea to save important Registrations to floppy disk (see p. 56).