Before You Start Playing
Setting Up the Music Stand
1.Attach the music stand by inserting it into the two holes.
Connecting the Power Cord
1.First, make sure that the [Power On] switch at the panel’s left side is OFF (not pushed in).
Master Volume
Min Max
2.Press the [Power On] switch to turn on the power.
The power will turn on, and the Basic Screen appears on
the display.
Lower position
ON
2.Connect the supplied power cord to the AC Inlet connector, then plug the other end into an AC
outlet.
*Only use the power cord supplied with this instrument.
*Whenever you do not intend to use the instrument for extended periods of time, pull out the power cord from the AC outlet.
Turning the Power On and Off
*Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
■Tuning On the Power
1.Make sure of the following before the power is
turned on.
•Is the power cord correctly connected to the AC inlet? •Is the power cord correctly connected to the AC outlet? •Is the [Master Volume] knob (located at the left of the Lower keyboard) set to the Min (minimum) position?
*This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
3.Turn the [Master Volume] knob or depress the expression pedal to adjust the volume to a suitable level.
Turning the [Master Volume] knob towards “Max” increases the volume; turning the knob towards “Min” decreases the volume. Likewise, pressing down on the expression pedal increases the volume, while easing up
on the pedal decreases the volume.
decrease the volume 
increase the volume
■Turning Off the Power
1.Before switching the power off, set the [Master Volume] knob to the Min (minimum) position.
2.Press the [Power On] switch to turn off the
power.
Upper position
OFF
*If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet. Refer to “Power Supply” (p. 5).
16
