Troubleshooting

The bass note of the Automatic Accompaniment does not sound

When a voice is selected for the Pedal Bass part, the bass of the Automatic Accompaniment will not sound.

When you started a Rhythm with an Intro, the Rhythm did not sound

Some Rhythms do not have rhythm sounds in the intro.

Sound is distorted / cracked

The Part Balance volume of each part is too high (p. 26).

The Reverb volume has been raised when the volume of each Part Balance button is already raised.

Either lower the Reverb volume, or adjust the Part Balance of each part (p. 26).

The [Master Volume] knob has been used to raise the overall volume excessively (p. 16).

Some keys (of certain keyboard parts) sound strange

You’ve assigned the same voice, using the same range, to multiple parts.

The Rhythm does not change when you press the Registration [1]–[8] buttons

The settings at which Registrations are recalled (Arranger Update) has been set to “DELAYED” (p. 92).

Bass is heard even though you are not playing the Bass Pedalboard

The Pedal [To Lower] button (p. 46) is ON.

When the Pedal [To Lower] button is ON, the Bass will be sounded by the Lower keyboard.

When playing the same sound in the Upper keyboard and Lower keyboard, the volume is different

On one of the keyboards, “Initial Touch” is turned ON (p. 87).

Lower keyboard cannot be heard

The Lower keyboard will not produce sound while an Intro or Ending is being played.

The sound is not played correctly

If you layer the same type of sound, or play an octave- shifted organ sound, the timing at which you play a note or the phase relationship between the two sounds may affect the way in which the sounds are heard, but this is not a malfunction.

Can’t play the demo songs

A floppy disk is inserted in the disk drive.

In order to play the demo song, you must remove the floppy disk from the disk drive (p. 35).

Can’t select Rhythms from a Music Style disk

The Rhythm [Disk] button has not been selected (p. 35).

The volume level of the instrument connected to AT- 15 is too low

Could you be using a connection cable that contains a resistor?

Use a connection cable that does not contain a resistor.

99

Page 99
Image 99
Roland AT15 owner manual Troubleshooting, Bass note of the Automatic Accompaniment does not sound