
Using the Registration Buttons
The
This provides a convenient way to change large numbers of panel settings during a performance, or to recall a complex panel setting.
| Write |
| Manual |
| 1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
| 7 |
| 8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Storing Registrations
1. Make all the panel settings that you wish to store.
2. While holding down the [Write] button, press one of the Registration [1] – [8] buttons.
The panel settings will be stored in the selected Registration button.
Settings that have been stored to Registration [1]–
[8]buttons are remembered even if the power is turned off. If you wish to restore the settings stored in the Registration buttons to their factory settings, use the “Factory Reset” operation (p. 17).
With the settings of Registration [1] – [8] buttons considered as one set, a single floppy disk can store up to 99 sets of data (p. 56).
For details on the settings that are stored in a Registration, refer to “Settings That Are Stored in the Registration Buttons” (p. 108).
51