Roland AT15 owner manual If the following screen appears

Using the Rhythm Performance

5. Use the Value [-] and [+] buttons to select where you wish the selected Rhythm to be stored.

6. Press the Rhythm [Disk] button to confirm the storage- destination Rhythm.

While the Rhythm is being loaded into internal memory, the following screen will be displayed.

fig.03-18

Once the Rhythm has been accommodated in memory, the basic screen reappears.

❍If the following screen appears

The following screens appear when a rhythm has already been saved to the save destination.

fig.03-17

To cancel the procedure, press the [Display/Exit] button.

7. Press the Rhythm [Disk] button again to start loading the

Rhythm into the internal memory.

NOTE

Never remove the disk or turn off the power while the Rhythm data is being loaded from disk into the AT-15. If you do so, the Rhythm data will not be loaded into the AT-15, and malfunctions could result. After returning the Rhythm stored in the Rhythm [Disk] button to the factory settings (see p. 40), re-load the Rhythm from disk.

37