Roland AT15 owner manual Using Headphones, Restoring All the Factory Default Settings

Before You Start Playing

Using Headphones

The AT-15 features a Phones jack. This allows you to play without having to worry about bothering others around you, even at night.

fig.01-08

1.Connect the headphones to the Phones jack on the bottom left of the unit.

The sound from the built-in speakers stops.

Now, sound is heard only through the headphones.

LCD

Contrast

Phones

2.Adjust the headphones volume with the [Master Volume] knob and Expression pedal.

* Accepts connection of Stereo headphones.

Some Notes on Using Headphones

•To prevent damage to the cord, handle the headphones only by the headset or the plug.

•Headphones may be damaged if the volume is too high when they are plugged in.

Lower the volume on the AT-15 before plugging in headphones.

•To prevent possible auditory damage, loss of hearing, or damage to the headphones, the headphones should not be used at an excessively high volume.

Use the headphones at a moderate volume level.

Restoring All the Factory Default Settings

The settings stored in the AT-15 can be returned to their

factory settings. This function is called “Factory Reset.”

1.Make sure there is no floppy disk in the disk drive before carrying out the procedure.

2.Turning off the power.

3.While holding down the [One Touch Program] button, press the [Power On] switch to turn the

power on.

fig.01-15

Do not turn off the power while the following screen is displayed.

fig.01-16

When factory reset is completed, the basic screen reappears.

*To return all settings other than the Rhythm [Disk] button settings to their original factory conditions, refer to page 18.

*Loading factory default settings will erase any Registrations currently in the memory of the AT-15. To save the registrations you are currently using, refer to “Saving Registration Sets to a Floppy Disk” (p. 56).

*To return only the Rhythm [Disk] button settings to their original factory conditions, refer to page 40.

17