Record and Playback Your Performance

4. Press the [Save] button to confirm the format.

While performance data is being saved to the floppy disk, the following

display appears.

fig.08-22

If the following screen will appear

If the floppy disk already contains performance data of the same name, the

following display will appear.

fig.08-23

If you wish to update the contents of the performance data

1.Press the [Rec] button.

If you wish to save the data without erasing the performance data already on floppy disk you must rename the song

1.Press the [Reset] button to cancel saving.

2.Change the name (p. 72), and perform the Save procedure once again.

74

NOTE

Music data that was saved in Atelier format cannot be played back correctly on instruments other than the Atelier series.

NOTE

Saving performance data in SMF format (SMF) requires a longer time than saving it in Atelier format (ORIGINAL).

Page 74
Image 74
Roland AT15 owner manual Press the Save button to confirm the format, If the following screen will appear