Adder Technology EPS-M8, X200AS/R, X200A/R, X100R, RS232, X100A/R, CATX-PS2A, X200R Unit Configuration

Unit Configuration

This page provides access to a selection of both basic and fundamental settings for the AdderView CATx IP.

Keybd Layout

Use the arrow buttons to match the keyboard layout expected by the host system.

Admin Passwd

Enter the password that will be used to gain administrator access to the AdderView CATx IP. There can only be one admin user and only that user is given access to the configuration menus. The admin password background will be red until a reasonably secure password has been entered, although this is only advisory as any password or no password may be entered.

Unit Name

The name entered here will be displayed on the local menus and the remote VNC/browser windows.

Time and Date

Use the left and right arrow keys to select the correct time and date. The time entry uses the 24 hour clock notation. The internal real time clock will continue to run for roughly one week without power to the unit, after that it will be lost and require resetting. Use the up and down arrow keys to move between each of the sections within the time and date entries.

Encryption

Three options are available: Always on, prefer off, prefer on. The one to choose depends on the specific details of your installation - see Encryption settings for details. The use of encryption imposes a slight performance overhead of roughly 10% but is highly secure against third party intrusion.

AdderView CATx IP Unit Config

Hardware		Rev	1
Firmware		Version				1.5
Keybd	Layout
		UK
Admin	Passwd
Unit	Name
Time				:			:
		21			27			31
Date
		4			Jan				2008
Encryption
		Prefer				Off

SaveCancel

To get here

1From a local or remote (not accessible from a global keyboard), log on as . the ‘admin’ user.

2Press (hotkeys can change).

3Press to select ‘More menus’.

4Select ‘Functions’.

5Select ‘Configure IP port’.

6Select ‘Unit Configuration’.

   



79