Adder Technology X100AS/R, X200AS/R, X200A/R Remote user skew adjustment, To use skew adjustment

Convergence test pattern showing the RGB crosses. In this case, the green signal can be seen out of line with the other two colours.

Remote user skew adjustment

The category 5, 5e and 6 cabling supported by the AdderView CATx consists of four pairs of wires per cable. Three of these pairs are used to convey red, green

and blue video signals to the remote video monitor. Due to the slight difference in
twist rate between these three pairs, the		1 2 3 4 5 6 7 8
red, green and blue video signals may not
arrive at precisely the same time. This is
visible as separate colour shadows on high
contrast screen images and is particularly
apparent when using higher screen
resolutions and some types of category 5e
cables.	8	8	Data signal
To alleviate this situation, the Adder
	7	7
X100AS/R and X200AS/R modules	6	6	Red
provide internal skew adjustment that	3	3	video signal
can help to rectify the situation. The	5	5	Green
skew adjustment works by delaying or	4	4	video signal
	2	2	Blue
advancing the timing of any of the red,
	1	1	video signal

green or blue colour signals so that they

are all delivered to the monitor at precisely the same time. For best results, the “skew” program supplied on the disk or downloadable from www.adder.com or www.adder.info is the most accurate way of setting skew as the red, green and blue lines are rendered exactly on the screen as single pixel wide lines. The skew.bmp test pattern can also be used but it is less accurate. Alternatively, you can create your own skew pattern using a standard image creation package, as detailed opposite.

To use skew adjustment

1Display a skew pattern on the appropriate computer. You can either use the supplied skew pattern or create your own:

Using the supplied skew pattern

iInsert the supplied Adder Installation CD-ROM into the CD player of the computer.

iiWithin Windows, use the My Computer option (usually available as a desktop icon or within the Start menu) to view the contents of the CD-ROM. Double-click the Skew entry to display the standard

test pattern. If necessary, maximise the application window so that the image fills the screen.

The screen will show a series of fine red, green and blue crosses which should all be

in line, vertically and horizontally. Skew affects the horizontal placement of the colours and using this pattern it is much easier to discover which, if any, colours are being adversely affected by the cable link.

Creating a skew test pattern

iRun any image creation/editing application, such as the Paint program supplied with Windows.

iiUsing the image application create three

stacked horizontal rectangles (one red, one green and one blue) that fill the width of the screen.

iiiDraw a vertical black line down across the coloured bars and then repeat this vertical line at intervals along the width of the coloured bars. These lines create breaks across the colours and give you more opportunities to view the horizontal position of each colour relative to the others.

2 On the remote user keyboard (connected to an Adder X100AS/R extender),

simultaneously, press the hotkeys (by default, and ) along with to enter configuration mode.

The three keyboard indicators (‘Num Lock’, ‘Caps Lock’ and ‘Scroll Lock’) will now begin to flash in sequence.

   



31