Adder Technology CATX-USBA, X200AS/R, X200A/R, X100R, RS232, X200R Upgrading AdderView CATx IP models

Upgrading AdderView CATx IP models

The AdderView CATx IP models are upgraded via global connection (through the IP network port). Upgrades are digitally signed by Adder using a secure key. This prevents unauthorised or altered firmware images being downloaded into the AdderView CATx IP.

To upgrade AdderView CATx IP models

1Download the latest firmware revision for the AdderView CATx IP from the Adder website and decompress the download file. View the decompressed files and make a note of the name and location of the .bin file that was part of the download file collection.

2Make a global connection to the AdderView CATx IP unit and login as the admin user.

2Once logged in, click the Configure button in the top right corner of the window.

3Click the Unit Configuration button.

4Click the Advanced Unit Configuration button.

5Click the Upgrade Firmware button. The following dialog will be displayed:

6Click OK. The AdderView CATx IP is now ready to accept the upgrade files. Open your browser and log into the AdderView CATx IP using the IP address that was confirmed in the dialog. Once connected, the AdderView CATx IP will offer the following screen:

7Click the Browse button and locate the .bin upgrade file that you downloaded earlier. The AdderView CATx IP will show the following screen:

8Select which portion of the AdderView CATx IP that you wish to upgrade. Tick both options to upgrade the complete unit. When ready, click the Perform upgrade button.

The upgrade will take place and its progress will be shown on screen.

   



49