JVC UX-G66R, XT-UXG66R Basic Settings, Setting the Clock, Setting the Display Illumination Dimmer

Basic Settings

PANEL			DIMMER
REMOTE CONTROL RM-SUXG6R
OPEN/CLOSE	DIMMER
ACTIVE		SLEEP	CLOCK/TIMER	STANDBY/ON
BASS EX. CLOCK/TIMER
					M I C R O C O M P O N E N T	S Y S T E M U X - G 6 6 R
BASS	TREBLE	FM MODE	MULTI JOG
PLAY MODE	REPEAT	AUTO PRESET
				FM/AM
				MULTI JOG	MOS - FET	VOLUME
PTY/EON	TITTLE/EDIT	ENTER
DISPLAY		CANCEL	SET
/CHARA.			CANCEL
	UP
<	SET	>	< / >	Display window
￿ DOWN

MDAUX

TAPECD

OPEN/CLOSE

AUX

Before operating the system any further, set the clock built in this system first, then some other basic settings.

Setting the Clock

You can set the clock using the remote control whether the system is turned on or turned off (i.e. standby mode).

1 Press CLOCK/TIMER button on the remote control.

The hour digit in the display window starts blinking.

2 Press < / > button on the remote control to adjust the hour, then press SET button on the remote control (rotating MULTI JOG dial also available).

•To correct the hour after pressing SET button, press CANCEL button. The hour digit starts blinking again.

3 Press < / > button on the remote control to adjust the minute, then press SET button on the remote control (rotating MULTI JOG dial also available).

If there is a power failure

The clock loses the setting and is reset to “0:00.”

To adjust the clock again

You need to press CLOCK/TIMER button five times until the clock setting mode is selected.

Setting the Display Illumination (Dimmer)

You can adjust the brightness of around the display window. Each time you press DIMMER button, the display window dims and brightens alternately.

•While the system is turned off:

Press DIMMER button, “DISPLAY OFF” appears in the display window for a while and the system clock disappears.

Press the button again, “DISPLAY ON” appears in the display window for a while and only the system clock become dimmed.

•While the system is turned on:

Press DIMMER button, both operating information and indicators in the display window dims. The light around MULTI JOG dial also becomes darker than usual. Press the button again, all the illumination around the display window recovers as usual.

Dimmer setting in the standby mode

Once the system is turned on, the dimmer setting in the standby mode does affect neither normal operations nor display indications.

10