Configuring Spanning Tree
Defining Multiple Spanning Tree
Defining MSTP Interface Settings
Network Administrators can assign MSTP Interface settings in the MSTP Instance Settings Page. To define MSTP interface settings:
1.Click Advanced Setup > Spanning Tree > MSTP > Interface Settings. The MSTP Interface Settings Page opens:
Figure 93: MSTP Interface Settings Page
The MSTP Instance Settings Page contains the following fields:
•Instance ID — Lists the MSTP instances configured on the device. Possible field range is
•Interface — Displays the interface for which the MSTP settings are displayed. The possible field values are:
–Port — Specifies the port for which the MSTP settings are displayed.
–LAG — Specifies the LAG for which the MSTP settings are displayed.
•MSTP — Specifies whether or not MSTP is enable on the interface. The possible field values are:
–Enabled — Enables MSTP on the interface.
–Disabled — Disables MSTP on the interface.
•Port State— Indicates whether the port is enabled for the specific instance. The possible field values are:
–Enabled — Enables the port for the specific instance.
–Disabled — Disables the port for the specific instance.
Page 151
