D-Link DES-3010FA/GA manual Multiple Host Settings

D-Link DES-3010FA/GA User Guide

•Traps — Indicates if traps are enabled for Multiple Hosts. The possible field values are:

–True — Indicates that traps are enabled for Multiple hosts.

–False— Indicates that traps are disabled for Multiple hosts.

•Trap Frequency — Defines the time period by which traps are sent to the host. The Trap Frequency (1- 1000000) field can be defined only if multiple hosts are disabled. The default is 10 seconds.

•Status — Indicates the host status. If there is an asterisk (*), the port is either not linked or is down. The pos- sible field values are:

–Unauthorized — Indicates that either the port control is Force Unauthorized and the port link is down, or the port control is Auto but a client has not been authenticated via the port.

–Not in Auto Mode — Indicates that the port control is Forced Authorized, and clients have full port access.

–Single-host Lock — Indicates that the port control is Auto and a single client has been authenticated via the port.

–No Single Host — Indicates that Multiple Host is enabled.

•Number of Violations — Indicates the number of packets that arrived on the interface in single-host mode, from a host whose MAC address is not the supplicant MAC address.

2.Click . The Multiple Host Settings Page opens:

Figure 45: Multiple Host Settings Page

3.Modify the Port, Enable Multiple Hosts, Action on Violation, Enable Traps, and Trap Frequency fields.

4.Click . The multiple host settings are modified, and the device is updated.

Page 90