D-Link DES-3010FA/GA manual Cable, Port, and Pinout Information

D-Link DES-3010FA/GA User Guide

The console LED indications are described in the following table:

Table 8:	Console LED Indications
Port Description		LED Indication	Description
Console		Flashing Green	Power On Self Test (POST) is in progress.
		Green	POST failure. A problem has been discovered during the
			POST.

Cable, Port, and Pinout Information

This section describes the devices physical interfaces and provides information about cable connections. Stations are connected to the device ports through the physical interface ports on the front panel. For each station, the appropriate mode (Half/Full Duplex, Auto Negotiation) is set. The default is Auto Negotiation.

Pin Connections for the 10/100/1000 Ethernet Interface

The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using straight cables. Transmission devices connected to each other use crossed cables. The following figure illustrates the pin allocation.

Figure 9: RJ-45 Pin Allocation

The following table describes the pin allocation

Table 9: RJ-45 Pin Connections for 10/100/1000 Base-TX

Pin Use

1TxRx 1+

2TxRx 1-

3TxRx 2+

4TxRx 2-

5TxRx 3+

6TxRx 3-

7TxRx 4+

8TxRx 4-

Page 20