D-Link DES-3010FA/GA User Guide
•IP Address — Indicates the station IP address, which is associated with the MAC address filled in below.
•MAC Address — Displays the station MAC address, which is associated in the ARP table with the IP address.
•Status — Displays the ARP table entry type. Possible field values are:
–Dynamic — The ARP entry is learned dynamically.
–Static — The ARP entry is a static entry.
•Remove — Removes a specific ARP entry. The possible field values are:
–Checked — Removes the selected ARP entries.
–Unchecked — Maintains the current ARP entries.
2.Define the ARP Entry Age Out and Clear ARP Table Entries fields.
3.Click 
. The ARP parameters are defined, and the device is updated.
To create a new ARP entry:
1.Click Basic Setup > IP Configuration > IP Addressing > ARP. The ARP Page opens.
2.Click 
. The Add ARP Entry Page opens:
Figure 77: Add ARP Entry Page
3.Define the Interface, IP Address, and MAC Address fields.
4.Click 
. The ARP interface is added, and the device is updated.
Page 128
