Configuring SNMP
Configuring SNMP Notifications
SNMPv3 Notification Recipient
The SNMPv3 Notification Recipient table contains the following fields:
•Recipient IP — Displays the IP address to which the traps are sent.
•Notification Type — Displays the type of notification sent. The possible field values are:
–Trap — Indicates that traps are sent.
–Inform — Indicates that informs are sent.
•User Name — Displays the user to which SNMP notifications are sent.
•Security Level — Displays the means by which the packet is authenticated. The possible field values are:
–No Authentication — Indicates that the packet is neither authenticated nor encrypted.
–Authentication — Indicates that the packet is authenticated.
•UDP Port — The UDP port used to send notifications. The field range is
•Filter Name — Includes or excludes SNMP filters.
•Timeout — The amount of time (seconds) the device waits before resending informs. The field range is 1- 300. The default is 10 seconds.
•Retries — The amount of times the device resends an inform request. The field range is
•Remove — Deletes the currently selected recipient. The possible field values are:
–Checked — Removes the selected recipient from the list of recipients.
–Unchecked — Maintains the list of recipients.
2.Click . The Add SNMP Notification Receiver Page opens:
Figure 116:Add SNMP Notification Receiver Page
Page 181