Aggregating Ports
Configuring LACP
Configuring LACP
Aggregate ports can be linked into
LAG ports can contain different media types if the ports are operating at the same speed. Aggregated links can be set up manually or automatically established by enabling Link Aggregation Control Protocol (LACP) on the rele- vant links. Aggregate ports can be linked into
1.Click Advanced Setup > Interface > LACP Parameters tab. The LACP Parameters Page opens.
Figure 57: LACP Parameters Page
The LACP Parameters Page contains the following fields:
•Port — Displays the port number to which timeout and priority values are assigned.
•
•LACP Timeout — Displays the administrative LACP timeout.
2.Click 
. The LACP Parameters Settings Page opens:
Page 105
