D-Link DES-3010FA/GA manual AC Power Connection

DLINK DES-3010FA/GA User Guide

d)Set flow control to none.

e)Under Properties, select VT100 for Emulation mode.

f)Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the setting is for Terminal keys (not Windows keys).

Note

When using HyperTerminal with Microsoft Windows 2000, ensure that you have Windows 2000 Service Pack 2 or later installed. With Windows 2000 Service Pack 2, the arrow keys function properly in HyperTerminal’s VT100 emulation. Go to www.microsoft.com for information on Windows 2000 service packs.

3.Connect the cable to the console port on the device front panel.

AC Power Connection

To connect the power supply perform the following:

1.Using a 5-foot (1.5 m) standard power cable with safety ground connected, connect the power cable to the AC main socket located on the back panel.

2.Connect the power cable to a grounded AC outlet.

3.Confirm that the device is connected and operating by checking that the Power Supply LED on the front panel is green.

Page 30