Configuring Quality of Service
Defining Bandwidth Settings
Defining Bandwidth Settings
The Bandwidth Settings Page defines the bandwidth settings for a specified egress interface. Modifying queue scheduling affects the queue settings globally. To define the bandwidth settings:
1.Click Basic Setup > Quality of Service > General Settings > Bandwidth Settings. The Bandwidth Settings Page opens.
Figure 119:Bandwidth Settings Page
The Bandwidth Settings Page displays the following fields:
•Status — Indicates if rate limiting is enabled on the interface. The possible field values are:
–Enable — Indicates that rate limiting is enabled on the interface.
–Disable — Indicates that rate limiting is disabled on the interface.
•Rate Limit — Configures the rate to which traffic is limited. The range is 70 – 285,000 kbps.
•Committed Information Rate (CIR) — Defines the CIR rate. The possible field range is 4096- 1,000,000,000.
2.Define the fields.
3.Click 
. The bandwidth settings are defined, and the device is updated.
Page 187
